How to Measure Windows for Blinds and Shades

Measuring guide

How to measure your windows for blinds and shades

Almost no window is perfectly square. Measure the width in three places and the narrowest reading decides what fits. Try the tool with your own numbers, then book a free in-home measure if you would rather have it confirmed.

Wide wood-framed bay window in a North Jersey home, ready to be measured for window treatments

Measure tool

Enter three widths. See what fits.

Mount type

Sample readings shown. Use a steel tape and read to the nearest 1/8″.

Height: (tallest reading)

Measuring it yourself

Five checks before you write anything down

  1. 1
    Width in three places.
    Measure across the top, middle and bottom. Use a steel tape, not a cloth one.
  2. 2
    Height in three places.
    Measure the left, centre and right sides. Use the tallest reading, for an inside or an outside mount.
  3. 3
    Inside mount: narrowest width.
    Measure the inside of the window casing to the nearest 1/8″. A shade sized to the widest reading will not fit the opening. Take no deductions for clearance; we allow for that.
  4. 4
    Outside mount: measure what you want to cover.
    Allow about 1½” of overlap on each side of the window (3″ in total) for light control and privacy. For height, measure from where the top of the shade will sit, typically about 1″ above the molding, down to the bottom of the sill or apron. Take no deductions.
  5. 5
    Look for obstructions.
    Handles, cranks and shallow trim can limit how and where a shade can mount.

Final order sizes are confirmed at your free in-home measure, so a small reading error never becomes a remake.

Rather not measure it yourself?

We come to you, measure every window and confirm the mount before anything is made. It is free and there is no obligation.